AudioCodes Mediapack mp-11x, User Manual

Page: 45 / 390

Version 5.2 45 August 2007
SIP User's Manual 4. Getting Started
4 Getting Started
The gateway is supplied with default networking parameters (i.e., MAC and IP addresses,
as listed in the table below) and with an application software (
cmp
file) residing on its flash
memory (with factory default parameters).
Before you begin configuring the gateway, refer to 'Configuration Concepts' on page 45 for
a description of the available gateway configuration methods. Using a preferred method,
change the gateway's default IP address to correspond with your network environment
(refer to 'Assigning an IP Address' on page
48 ).
For information on quickly setting up the gateway with basic parameters using a standard
Web browser, refer to 'Configuring the Basic Parameters' on page
53 .
Table 4-1: Default Networking Parameters
Parameter Default Value
IP Address
•
FXS and FXS / FXO: 10.1.10.10
•
FXO: 10.1.10.11
Subnet Mask
255.255.0.0
Default Gateway IP Address
0.0.0.0
4.1 Configuration Concepts
You can deploy the gateway in a wide variety of applications enabled by its parameters
and configuration files (e.g., Call Progress Tones). The parameters can be configured and
configuration files can be loaded using the following tools:
„ A standard Web browser (described in 'Web-based Management' on page 55 ).
„ A configuration file referred to as the
ini
file. For information on how to use the
ini
file,
refer to 'ini File Configuration' on page 251 .
„ An SNMP browser software (refer to the
SIP Series Reference Manual
).
„ AudioCodes’ Element Management System (refer to
AudioCodes’ EMS User’s Manual
or
EMS Product Description
).
To upgrade the gateway (i.e., load new software or configuration files), use the gateway's
Embedded Web Server's Software Upgrade Wizard (refer to 'Software Upgrade Wizard' on
page
226 ), or alternatively, use the BootP/TFTP configuration utility (refer to the
SIP Series
Reference Manual
).