manualshive.com logo in svg

AudioCodes Mediapack mp-11x, User Manual

The AudioCodes Mediapack mp-11x is a reliable and high-quality VoIP gateway solution for businesses. Easily configure and troubleshoot the device with the free User Manual available for download from manualshive.com. Ensure seamless communication with this advanced and user-friendly product.

Share
Download
background image

SIP User's Manual 

168 

Document #: LTRT-65409 

 

 MediaPack 

Series 

 

5.6.2 Configuring 

the 

Application Settings 

The 'Application Settings' screen is used for configuring various application parameters 
(e.g., for Telnet). 

¾

 

To configure the Application Settings parameters, take these 4 
steps: 

1. 

Open the 'Application Settings' screen (

Advanced Configuration

 menu > 

Network 

Settings 

> 

Application Settings

 option). 

Figure 

 

5-38: Application Settings Screen 

 

2. 

Configure the Application Settings according to the table below. 

3. 

Click the 

Submit

 button to save your changes. 

4. 

To save the changes to flash memory, refer to 'Saving Configuration' on page 

238

. 

Table 

 

5-30: Network Settings, Application Settings Parameters 

Parameter 

Description 

NTP Settings

 

For detailed information on Network Time Protocol (NTP), refer to 'Simple Network Time Protocol 
Support' on page 

371

. 

Summary of Contents for Mediapack mp-11x







































































































































































































































































































































































































Reviews:

No comments

Related manuals for Mediapack mp-11x

Panasonic KX-TDA0490 Programming Manual preview
KX-TDA0490
Brand: Panasonic Pages: 72
Ruckus Wireless MediaFlex 7211 Quick Setup Manual preview
MediaFlex 7211
Brand: Ruckus Wireless Pages: 2
Acer Projector Gateway User Manual preview
Projector Gateway
Brand: Acer Pages: 58
Cisco 1100 Series Hardware Installation Manual preview
1100 Series
Brand: Cisco Pages: 76
Tadiran Telecom TGW1E1-2G User Configuration Manual preview
TGW1E1-2G
Brand: Tadiran Telecom Pages: 89
t.a.c. Xenta 913 Manual preview
Xenta 913
Brand: t.a.c. Pages: 4
Avaya SG208 Hardware Installation Manual preview
SG208
Brand: Avaya Pages: 30
Avaya S8300 Series Manual preview
S8300 Series
Brand: Avaya Pages: 72
Radio-tone RT-RoIP2 User Manual preview
RT-RoIP2
Brand: Radio-tone Pages: 12
Arrive AirPoint 2011-BYMG Installation Manuals preview
AirPoint 2011-BYMG
Brand: Arrive Pages: 2
Innbox G74 Quick Start Manual preview
G74
Brand: Innbox Pages: 16
Universe Future ZWG2000AG Manual preview
ZWG2000AG
Brand: Universe Future Pages: 23
Banner SureCross DX70 Series Manual preview
SureCross DX70 Series
Brand: Banner Pages: 29
Zte ZXHN H1600 Maintenance Management Manual preview
ZXHN H1600
Brand: Zte Pages: 109
Multitech Conduit AP User Manual preview
Conduit AP
Brand: Multitech Pages: 35
Multitech Conduit 300 Series Hardware Manual preview
Conduit 300 Series
Brand: Multitech Pages: 42
Uniden UOE1600 Manual preview
UOE1600
Brand: Uniden Pages: 2
Patton FiberPlex FPX6000 Series User Manual preview
FiberPlex FPX6000 Series
Brand: Patton Pages: 38

Brands by name

Popular brands

Load more brands