AudioCodes Mediapack mp-11x, User Manual

Page: 303 / 390

Version 5.2 303 August 2007
SIP User's Manual 6. ini File Configuration
Table 6-10: Analog Telephony Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
TimeToSampleAnalogL
ineVoltage
Determines the frequency at which the analog line voltage is sampled
(after offhook), for detection of the current disconnect threshold.
The valid range is 100 to 2500 msec. The default value is 1000 msec.
Note:
Applicable only to FXO gateways.
AnalogCallerIDTimimg
Mode
ƒ
[0]
= Caller ID is generated between the first two rings (default).
ƒ
[1]
= The gateway attempts to find an optimized timing to generate the
Caller ID according to the selected Caller ID type.
Notes:
ƒ
Applicable only to FXS gateways.
ƒ
When used with distinctive ringing, the Caller ID signal doesn't change
the distinctive ringing timing.
BellcoreCallerIDTypeO
neSubStandard
Selects the Bellcore Caller ID sub-standard.
ƒ
[0]
= Between rings (default).
ƒ
[1]
= Not ring related.
ETSICallerIDTypeOneS
ubStandard
Selects the ETSI FSK Caller ID Type 1 sub-standard (FXS only).
ƒ
[0]
= ETSI between rings (default).
ƒ
[1]
= ETSI before ring DT_AS.
ƒ
[2]
= ETSI before ring RP_AS.
ƒ
[3]
= ETSI before ring LR_DT_AS.
ƒ
[4]
= ETSI not ring related DT_AS.
ƒ
[5]
= ETSI not ring related RP_AS.
ƒ
[6]
= ETSI not ring related LR_DT_AS.
ETSIVMWITypeOneSta
ndard
Selects the ETSI Visual Message Waiting Indication (VMWI) Type 1 sub-
standard.
ƒ
[0]
= ETSI VMWI between rings (default)
ƒ
[1]
= ETSI VMWI before ring DT_AS
ƒ
[2]
= ETSI VMWI before ring RP_AS
ƒ
[3]
= ETSI VMWI before ring LR_DT_AS
ƒ
[4]
= ETSI VMWI not ring related DT_AS
ƒ
[5]
= ETSI VMWI not ring related RP_AS
ƒ
[6]
= ETSI VMWI not ring related LR_DT_AS
BellcoreVMWITypeOne
Standard
Selects the Bellcore VMWI sub-standard.
ƒ
[0]
= Between rings (default).
ƒ
[1]
= Not ring related.