AudioCodes Mediapack mp-11x, User Manual

Page: 281 / 390

Version 5.2 281 August 2007
SIP User's Manual 6. ini File Configuration
Table 6-7: SIP Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
IsRegisterNeeded
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
RegistrarIP
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
RegistrarName
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
GWRegistrationName
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
AuthenticationMode
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
OOSOnRegistrationFail
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
RegistrationTime
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
RegistrationTimeDivider
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
RegistrationRetryTime
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
RegisterOnInviteFailure
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
RegistrationTimeThreshol
d
For a description of this parameter, refer to 'Proxy & Registration
Parameters' on page
82 .
NumberOfActiveDialogs
Defines the maximum number of active SIP dialogs that are not call
related (i.e., REGISTER and SUBSCRIBE). This parameter is used to
control the Registration / Subscription rate.
The valid range is 1 to 5. The default value is 5.
PrackMode
For a description of this parameter, refer to 'General Parameters' on
page
70 .
AssertedIdMode
For a description of this parameter, refer to 'General Parameters' on
page
70 .
PAssertedUserName
Defines a 'representative number' (up to 50 characters) that is used as
the User Part of the Request-URI in the P-Asserted-Id header of an
outgoing INVITE (for Tel-to-IP calls).
The default value is NULL.
UseAORInReferToHeader
Defines the source for the SIP URI set in the Refer-to header of
outgoing REFER messages.
ƒ
[0]
= Use SIP URI from Contact header (default) of the initial call.
ƒ
[1]
= Use SIP URI from To/From header of the initial call.
UseTelURIForAssertedID
For a description of this parameter, refer to 'General Parameters' on
page 70 .