AudioCodes Mediapack mp-11x, User Manual

Page: 211 / 390

Version 5.2 211 August 2007
SIP User's Manual 5. Web-based Management
5.9.1 Configuring the SNMP Trap Destinations Table
The 'SNMP Trap Destinations' screen allows you to configure the attributes of up to five
SNMP managers.
¾
To configure the SNMP Trap Destination table, take these 5 steps:
1.
Access the 'Management Settings' screen (
Advanced Configuration
menu >
Management Settings
); the 'Management Settings' screen is displayed (refer to
'Configuring the Management Settings' on page 208 ).
2.
Open the 'SNMP Trap Destination' screen by clicking the arrow sign (-->) to the right
of the SNMP Trap Destinations label.
Figure 5-54: SNMP Trap Destinations Screen
3.
Configure the SNMP Trap parameters according to the table below.
4.
Click the
Submit
button to save your changes.
5.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .
Note:
If you clear a check box and then click
Submit
, all settings in the same row
revert to their defaults.