AudioCodes Mediapack mp-11x, User Manual

Page: 36 / 390

SIP User's Manual 36 Document #: LTRT-65409
MediaPack Series
¾
To cable the combined MP-11x FXS/FXO Lifeline, take these 2
steps:
1.
Connect a fax machine, modem, or phone to each of the FXS ports.
2.
Connect an analog PSTN line to each of the FXO ports.
Note:
The use of the Lifeline on network failure can be disabled using the
LifeLineType
ini
file parameter (described in 'System Parameters' on page
264 ).
3.1.4.5 Connecting MP-11x to Power
The MP-11x is powered from a standard AC electrical outlet.
Warning:
Units must be connected (by service personnel) to a socket-outlet with a
protective earthing connection.
¾
To connect MP-11x to the power supply:
„ Connect the MP-11x power socket to a standard electrical outlet using the supplied
AC power cord.
3.2 Installing the MP-124
To install the MP-124, perform the following installation steps in chronological order:
„ Unpack the MP-124 (refer to 'Unpacking' on page 37 ).
„ Check the package contents (refer to 'Package Contents' on page 37 ).
„ Mount the MP-124 (refer to 'Mounting the MP-124' on page 37 ).
„ Cable the MP-124 (refer to 'Cabling the MP-124' on page 40 ).
After connecting the MP-124 to the power source, the
Ready
and
LAN
LEDs on the front
panel light up green (after a self-testing period of about 1 minute). Any malfunction
changes the
Ready
LED to red.
When you have completed the above installation steps, you are then ready to start
configuring the gateway (refer to 'Web-based Management' on page
55 ).