AudioCodes Mediapack mp-11x, User Manual

Page: 296 / 390

SIP User's Manual 296 Document #: LTRT-65409
MediaPack Series
Table 6-10: Analog Telephony Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
TargetOfChannel
Defines telephone numbers that are automatically dialed when a specific
port is used.
Format of this
ini
file parameter table:
[TargetOfChannel]
FORMAT TargetOfChannel_
Index
= TargetOfChannel_
Destination
,
TargetOfChannel_
Type
, TargetOfChannel_
Port
,
TargetOfChannel_
Module
;
[\TargetOfChannel]
Where,
ƒ
Destination = Destination phone number
ƒ
Type = following values:
[1] = Destination phone number is automatically dialed if phone is
offhooked (for FXS gateways) or ring signal is applied to port (FXO
gateways).
[0] = automatic dialing is disabled.
[2] = enables Hotline -- when a phone is offhooked and no digit is
pressed for HotLineToneDuration, the destination phone number is
automatically dialed.
ƒ
Port = Port number
ƒ
Module = Module number (0 - 5) N/A
For example:
[TargetOfChannel]
TargetOfChannel 2 = 108,1,7,$$;
(Automatic dialing on port 7)
[\TargetOfChannel]
Notes:
ƒ
For an explanation on
ini
file parameter tables, refer to 'Structure of ini
File Parameter Tables' on page 253 .
ƒ
The indexing of this
ini
file parameter table starts with 1.
ƒ
The numbering of channels starts with 0.
ƒ
Define this parameter for each gateway port that implements Automatic
Dialing.
ƒ
This parameter can appear up to 8 times for 8-port gateways and up to
24 times for MP-124 gateways.
ƒ
To configure the Automatic Dialing Table using the Web interface, refer
to 'Automatic Dialing' on page
149 .