AudioCodes Mediapack mp-11x, User Manual

Page: 379 / 390

Version 5.2 379 August 2007
SIP User's Manual 8. Networking Capabilities
Below is an example of an
ini
file containing VLAN and Multiple IPs parameters:
; VLAN Configuration
VlanMode=1
VlanOamVlanId=4
VlanNativeVlanId=4
VlanControlVlanId=5
VlanMediaVlanID=6
; Multiple IPs Configuration
EnableMultipleIPs=1
LocalMediaIPAddress=10.33.174.50
LocalMediaSubnetMask=255.255.0.0
LocalMediaDefaultGW=10.33.0.1
LocalControlIPAddress=10.32.174.50
LocalControlSubnetMask=255.255.0.0
LocalControlDefaultGW=0.0.0.0
LocalOAMPAddress=10.31.174.50
LocalOAMSubnetMask=255.255.0.0
LocalOAMDefaultGW=0.0.0.0
; IP Routing table parameters
RoutingTableDestinationsColumn = 130.33.4.6, 83.4.87.6
RoutingTableDestinationMasksColumn = 255.255.255.255 ,
255.255.255.0
RoutingTableGatewaysColumn = 10.32.0.1 , 10.31.0.1
RoutingTableInterfacesColumn = 1 , 0
RoutingTableHopsCountColumn = 20,20
2.
Use the BootP/TFTP utility (refer to the
SIP Series Reference Manual
) to load and
burn
(-fb option) the firmware version and the
ini
file you prepared in the previous step
to the gateway (VLANs and multiple IPs support is available only when the firmware is
burned to flash).
3.
Reset the gateway after disabling it on the BootP/TFTP utility.