AudioCodes Mediapack mp-11x, User Manual

Page: 43 / 390

Version 5.2 43 August 2007
SIP User's Manual 3. Installing the MediaPack
3.2.4.4 Connecting MP-124 RS-232 Port to a PC
Follow the procedure below to connect the MP-124 serial (RS-232) interface to a PC using
a standard, straight-through cable with DB-9 connectors on either end.
¾
To connect MP-124 to a PC, take these 2 steps:
1.
Connect the DB-9 connector (refer to the figure below for connector pinouts), on one
end of the cable, to the MP-124 RS-232 port (labeled
RS-232
).
2.
Connect the DB-9 connector (refer to the figure below for connector pinouts) at the
other end of the cable, to either the COM1 or COM2 RS-232 communication port on
your PC.
Figure 3-13: MP-124 RS-232 Connector Pinouts
For information on establishing a serial communications link with the MP-124, refer to
Establishing a Serial Communications Link with the MediaPack.
3.2.4.5 Connecting MP-124 to Power
The MP-124 is powered from a standard AC electrical outlet.
¾
To connect MP-124 to the power supply:
„ Connect the MP-124 power socket to a standard electrical outlet using the supplied
AC power cord.