AudioCodes Mediapack mp-11x, User Manual

Page: 51 / 390

Version 5.2 51 August 2007
SIP User's Manual 4. Getting Started
The following configuration parameters can be queried or modified via the voice menu:
Table 4-2: Configuration Parameters Available via the Voice Menu
Item Number at Menu
Prompt
Description
1
IP address
2
Subnet mask
3
Default Gateway IP address
4
Primary DNS server IP address
7
DHCP enable / disable
11
MGCP call agent IP address (N/A)
12
MGCP call agent port number (N/A)
99
Voice menu password (initially 12345).
Note:
The voice menu password can also be changed using the parameter
VoiceMenuPassword (refer to 'Configuring the General Security Settings' on
page
197 ).
4.3.4 Assigning an IP Address Using the CLI
Assigning an IP address using the command-line interface (CLI) is performed in two
stages:
1.
Accessing the CLI (refer to 'Accessing the CLI' on page 51 ) using a standard Telnet
application or serial communication software (e.g., HyperTerminal
TM
) connected to the
RS-232 port.
2.
Assigning an IP address to the gateway (refer to 'Assigning an IP Address' on page
52 ).
4.3.4.1 Accessing the CLI
The procedure below describes how to access the CLI using either Telnet or RS-232
interface.
¾
To access the CLI using the embedded Telnet server, take these 3
steps:
1.
Enable the embedded Telnet server, by performing the following:
a.
Access the gateway's Embedded Web Server (refer to 'Accessing the Embedded
Web Server' on page
58 ).
b.
Open the 'Application Settings' screen (
Advanced Configuration
menu >
Network Settings
>
Application Settings
option), and therein set the parameter
‘Embedded Telnet Server’ to ‘Enable (Unsecured)’ or ‘Enable Secured (SSL)’.
For detailed information, refer to 'Configuring the Application Settings' on page
168 .