AudioCodes Mediapack mp-11x, User Manual

Page: 356 / 390

SIP User's Manual 356 Document #: LTRT-65409
MediaPack Series
3.
In the ‘Tel to IP Routing’ screen, enter 10 in the ‘Destination Phone Prefix’ field, and
the IP address of the FXS gateway (10.1.10.3) in the field ‘IP Address’.
Figure 7-8: Tel to IP Routing Screen
4.
In the ‘Protocol Management’ screen, set the parameter ‘Dialing Mode’ to ‘Two Stage’
(IsTwoStageDial = 1).
7.13 Working with Supplementary Services
The gateway supports the following supplementary services:
„ Call Hold and Retrieve; refer to 'Call Hold and Retrieve' on page 357
„ Consultation / Alternate; refer to 'Consultation / Alternate' on page 357
„ Call Transfer; refer to 'Call Transfer' on page 358
„ Call Forward (3xx Redirect Responses); refer to 'Call Forward' on page 358
„ Call Waiting (182 Queued Response); refer to 'Call Waiting' on page 359
„ Message Waiting Indication (MWI); refer to 'Message Waiting Indication' on page 360
„ Caller ID (refer to 'Caller ID' on page 361 )
To activate these supplementary services (Hold, Transfer, Forward, Waiting and MWI) on
the gateway, enable each service’s corresponding parameter either from the Embedded
Web Server or via the ini file.