AudioCodes Mediapack mp-11x, User Manual

Page: 50 / 390

SIP User's Manual 50 Document #: LTRT-65409
MediaPack Series
4.3.3 Assigning an IP Address Using the Voice Menu Guidance
Initial configuration of the gateway can be performed using a standard touch-tone
telephone connected to one of the FXS analog ports. The voice menu can also be used to
query and modify basic configuration parameters.
¾
To assign an IP address using the voice menu guidance, take
these 9 steps:
1.
Connect a telephone to one of the FXS ports.
2.
Lift the handset and dial ***12345 (three stars followed by the digits 1, 2, 3, 4, 5).
3.
Wait for the 'configuration menu' voice prompt to be played.
4.
To change the IP address:
a.
Press 1 followed by the pound key (#); The current IP address of the gateway is
played.
b.
Press # to change it.
c.
Dial the new IP address. Use the star (*) key instead of dots ".", e.g.,
192*168*0*4, and then press # to finish.
d.
Review the new IP address, and then press 1 to save it.
5.
To change the subnet mask:
a.
Press 2 followed by the # key; The current subnet mask of the gateway is played.
b.
Press # to change it.
c.
Dial the new subnet mask (e.g., 255*255*0*0) and then press # to finish.
d.
Review the new subnet mask, and then press 1 to save it.
6.
To change the default Gateway IP address:
a.
Press 3 followed by the # key; The current default Gateway address of the
gateway is played.
b.
Press # to change it.
c.
Dial the new default Gateway address (e.g., 192*168*0*1), and then press # to
finish.
d.
Review the new default Gateway address, and then press 1 to save it.
7.
Hang up the handset.
8.
Access the gateway's Embedded Web Server with the new IP address you assigned
(refer to 'Accessing the Embedded Web Server' on page
58 ).
9.
Complete the gateway’s configuration and save it to the non-volatile memory (refer to
'Saving Configuration' on page
238 ).