AudioCodes Mediapack mp-11x, User Manual

Page: 124 / 390

SIP User's Manual 124 Document #: LTRT-65409
MediaPack Series
5.5.3.1 Dialing Plan Notation
The dialing plan notation applies to all the Manipulation tables as well as to the Tel to IP
Routing table (refer to 'Tel to IP Routing Table' on page
129 ) and to IP to Hunt Group
Routing table (refer to 'IP to Hunt Group Routing' on page 132 ). The dialing notation
applies to numbers entered in the 'Destination Prefix' and 'Source Prefix' fields of these
tables to represent multiple numbers.
Table 5-18: Dialing Plan Notations
Notation Description Example
[n-m]
Represents a range of
numbers.
(
Note:
range of letters is not
supported.)
[5551200-5551300]#: Represents all numbers from
5551200 to 5551300.
123[100-200]#: Represents all numbers from 123100
to 123200.
[n,m]
Represents multiple
numbers.
Note:
This
notation only supports
single-digit numbers.
[2,3,4]xxx#: Represents four-digit numbers that start
with 2, 3 or 4.
x
Represents any single digit. 54324: Represents any number that starts with 54324.
Pound sign (#)
at the end of a
number
Represents the end of a
number. 54324xx#: Represents a 7 digit number that starts with
54324.
A single
asterisk (*)
Represents any number. *: Represents any number.
The gateway matches the rules starting at the top of the table (i.e., top rules take
precedence over lower rules). For this reason, enter more specific rules above more
generic rules. For example, if you enter 551 in entry 1 and 55 in entry 2, the gateway
applies rule 1 to numbers that starts with 551 and applies rule 2 to numbers that start with
550, 552, 553, 554, 555, 556, 557, 558 and 559. However if you enter 55 in entry 1 and
551 in entry 2, the gateway applies rule 1 to all numbers that start with 55 including
numbers that start with 551.
5.5.3.2 Mapping NPI/TON to Phone-Context
The
Phone-Context Table
option is used to configure the mapping of NPI and TON to the
Phone-Context SIP parameter. When a call is received from the Tel, the NPI and TON are
compared against the table and the Phone-Context value is used in the outgoing SIP
INVITE message. The same mapping occurs when an INVITE with a Phone-Context
attribute is received. The Phone-Context parameter appears in the standard SIP headers
where a phone number is used (Request-URI, To, From, Diversion).
You can also configure the Phone Context table using the
ini
file parameter PhoneContext
(refer to 'Number Manipulation and Routing Parameters' on page 304 ).