AudioCodes Mediapack mp-11x, User Manual

Page: 34 / 390

SIP User's Manual 34 Document #: LTRT-65409
MediaPack Series
3.1.4.2 Connecting MP-11x to FXS /FXO Devices
Follow the procedure below for connecting MP-11x to FXO or FXS devices.
¾
To connect MP-11x to FXO or FXS devices:
„ Using an RJ-11 two-wire telephone cords (refer to figure below for connector pinouts),
connect the MP-11x to the required telephone interfaces:
•
FXS:
connect the MP-11x FXS ports (grouped under the label
FXS
) to fax
machines, modems, or telephones.
•
FXO:
connect the MP-11x FXO ports (grouped under the label
FXO
) to telephone
exchange analog lines or PBX extensions.
Figure 3-5: RJ-11 Phone Connector Pinouts
Note:
Ensure that FXS and FXO ports are connected to the correct devices,
otherwise damage to the MP-11x can occur.
3.1.4.3 Connecting MP-11x RS-232 Port to a PC
Follow the procedure below to connect the MP-11x serial (RS-232) interface to a PC using
a straight-through, PS/2 to DB-9 cable adaptor.
Note:
The PS/2 to DB-9 cable adaptor is not included in the MP-11x package.
¾
To connect MP-11x to a PC, take these 2 steps:
1.
Connect the PS/2 connector (refer to the figure below for connector pinouts), on one
end of the cable, to the MP-11x RS-232 port (labeled
RS-232
).
2.
Connect the DB-9 connector at the other end of the cable to either the COM1 or
COM2 RS-232 communication port on your PC.