AudioCodes Mediapack mp-11x, User Manual

Page: 176 / 390

SIP User's Manual 176 Document #: LTRT-65409
MediaPack Series
5.7 Media Settings
The
Media Settings
submenu is used to configure the gateway's channel parameters.
These parameters are applied to all the gateway's channels.
From the
Media Settings
submenu, you can define the following:
„ Voice Settings (refer to 'Configuring the Voice Settings' on page 176 )
„ Fax / Modem / CID Settings (refer to 'Configuring the Fax / Modem / CID Settings' on
page
179 )
„ RTP/RTCP Settings (refer to 'Configuring the RTP / RTCP Settings' on page 183 )
„ Hook-Flash Settings (refer to 'Configuring the Hook-Flash Settings' on page 186 )
„ General Media Settings (refer to 'Configuring the General Media Settings' on page
187 )
Notes:
•
Parameters contained within square brackets are the names used to
configure the parameters via the
ini
file.
•
Channel parameters are changeable on-the-fly. Changes take effect from
next call.
•
Several Channels Settings parameters can be configured per call using
profiles (refer to 'Configuring the Profile Definitions' on page
138 ).
•
The parameter 'Fax Transport Mode' (Fax / Modem / CID Settings
screen) is overridden by the parameter IsFaxUsed.
5.7.1 Configuring the Voice Settings
The 'Voice Settings' screen is used for configuring various voice parameters such as voice
volume.
¾
To configure the Voice Settings parameters, take these 4 steps:
1.
Open the 'Voice Settings' screen (
Advanced Configuration
menu >
Media Settings
>
Voice Settings
option).