AudioCodes Mediapack mp-11x, User Manual

Page: 175 / 390

Version 5.2 175 August 2007
SIP User's Manual 5. Web-based Management
2.
Configure the VLAN Settings according to the table below.
3.
Click the
Submit
button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .
Table 5-33: Network Settings -- VLAN Settings Parameters
Parameter Description
VLAN Mode
[VlANMode]
Sets the VLAN functionality.
ƒ
[0]
Disable (default).
ƒ
[1]
Enable.
ƒ
[2]
PassThrough = N/A.
Note:
This parameter cannot be changed on-the-fly
and requires a gateway reset.
IP Settings
Native VLAN ID
[VLANNativeVlanID]
Sets the native VLAN identifier (PVID, Port VLAN ID).
The valid range is 1 to 4094. The default value is 1.
OAM VLAN ID
[VLANOamVlanID]
Sets the OAM (Operation, Administration and
Management) VLAN identifier. The valid range is 1 to
4094. The default value is 1.
Control VLAN ID
[VLANControlVlanID]
Sets the control VLAN identifier.
The valid range is 1 to 4094. The default value is 2.
Media VLAN ID
[VLANMediaVlanID]
Sets the media VLAN identifier.
The valid range is 1 to 4094. The default value is 3.
Priority Settings
Network Priority
[VLANNetworkServiceClassPriority]
Sets the priority for Network service class content.
The valid range is 0 to 7. The default value is 7.
Media Premium Priority
[VLANPremiumServiceClassMediaPriority]
Sets the priority for the Premium service class
content and media traffic.
The valid range is 0 to 7. The default value is 6.
Control Premium Priority
[VLANPremiumServiceClassControlPriority]
Sets the priority for the Premium service class
content and control traffic.
The valid range is 0 to 7. The default value is 6.
Gold Priority
[VLANGoldServiceClassPriority]
Sets the priority for the Gold service class content.
The valid range is 0 to 7. The default value is 4.
Bronze Priority
[VLANBronzeServiceClassPriority]
Sets the priority for the Bronze service class content.
The valid range is 0 to 7. The default value is 2.