AudioCodes Mediapack mp-11x, User Manual

Page: 181 / 390

Version 5.2 181 August 2007
SIP User's Manual 5. Web-based Management
Table 5-35: Media Settings -- Fax/Modem/CID Parameters
Parameter Description
V.21 Modem Transport Type
[V21ModemTransportType]
V.21 Modem Transport Type that the gateway uses.
ƒ
[0]
Disable = Disable (Transparent) -- default
ƒ
[1]
Enable Relay = N/A
ƒ
[2]
Enable Bypass.
ƒ
[3]
Events Only = Transparent with Events.
V.22 Modem Transport Type
[V22ModemTransportType]
V.22 Modem Transport Type that the gateway uses.
ƒ
[0]
Disable = Disable (Transparent)
ƒ
[1]
Enable Relay = N/A
ƒ
[2]
Enable Bypass = (default)
ƒ
[3]
Events Only = Transparent with Events
V.23 Modem Transport Type
[V23ModemTransportType]
V.23 Modem Transport Type that the gateway uses.
ƒ
[0]
Disable = Disable (Transparent)
ƒ
[1]
Enable Relay = N/A
ƒ
[2]
Enable Bypass = (default)
ƒ
[3]
Events Only = Transparent with Events
V.32 Modem Transport Type
[V32ModemTransportType]
V.32 Modem Transport Type that the gateway uses.
ƒ
[0]
Disable = Disable (Transparent)
ƒ
[1]
Enable Relay = N/A
ƒ
[2]
Enable Bypass = (default)
ƒ
[3]
Events Only = Transparent with Events
Note:
This option applies to V.32 and V.32bis modems.
V.34 Modem Transport Type
[V34ModemTransportType]
V.90 / V.34 Modem Transport Type that the gateway uses.
ƒ
[0]
Disable = Disable (Transparent)
ƒ
[1]
Enable Relay = N/A
ƒ
[2]
Enable Bypass = (default)
ƒ
[3]
Events Only = Transparent with Events
Fax Relay Redundancy Depth
[FaxRelayRedundancyDepth
]
Number of times that each fax relay payload is retransmitted to the
network. This parameter is applicable only to non-V.21 packets.
The valid range is 0 to 2, where 0 is no redundancy, 1 is one packet
redundancy, and 2 is two packet redundancy.
The default value is 0.
Fax Relay Enhanced
Redundancy Depth
[FaxRelayEnhancedRedunda
ncyDepth]
Number of times that control packets are retransmitted when using
the T.38 standard.
The valid range is 0 to 4. The default value is 2.
Fax Relay ECM Enable
[FaxRelayECMEnable]
ƒ
[0]
Disable = Error Correction Mode (ECM) mode is not used
during fax relay.
ƒ
[1]
Enable = ECM mode is used during fax relay (default).