AudioCodes Mediapack mp-11x, User Manual

Page: 270 / 390

SIP User's Manual 270 Document #: LTRT-65409
MediaPack Series
Table 6-2: System Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
Set the number of BootP requests
the gateway sends during start-up.
The gateway stops sending BootP
requests when either BootP reply is
received or number of retries is
reached.
ƒ
[1]
= 1 BootP retry, 1 sec.
ƒ
[2]
= 2 BootP retries, 3 sec.
ƒ
[3]
= 3 BootP retries, 6 sec.
(default).
ƒ
[4]
= 10 BootP retries, 30 sec.
ƒ
[5]
= 20 BootP retries, 60 sec.
ƒ
[6]
= 40 BootP retries, 120 sec.
ƒ
[7]
= 100 BootP retries, 300 sec.
ƒ
[15]
= BootP retries indefinitely.
Set the number of DHCP packets
the gateway sends.
After all packets were sent, if there's
still no reply, the gateway loads
from flash.
ƒ
[1]
= 4 DHCP packets
ƒ
[2]
= 5 DHCP packets
ƒ
[3]
= 6 DHCP packets (default)
ƒ
[4]
= 7 DHCP packets
ƒ
[5]
= 8 DHCP packets
ƒ
[6]
= 9 DHCP packets
ƒ
[7]
= 10 DHCP packets
ƒ
[15]
= 18 DHCP packets
BootPSelectiveEnable
Enables the Selective BootP mechanism.
ƒ
[1]
= Enabled.
ƒ
[0]
= Disabled (default).
The Selective BootP mechanism (available from Boot version 1.92)
enables the gateway's integral BootP client to filter unsolicited
BootP/DHCP replies (accepts only BootP replies that contain the text
'AUDC' in the vendor specific information field). This option is useful in
environments where enterprise BootP/DHCP servers provide undesired
responses to the gateway's BootP requests.
Note:
When working with DHCP (DHCPEnable = 1) the selective BootP
feature must be disabled.
BootPDelay
The interval between the device's startup and the first BootP/DHCP
request that is issued by the device.
ƒ
[1]
= 1 second (default).
ƒ
[2]
= 3 second.
ƒ
[3]
= 6 second.
ƒ
[4]
= 30 second.
ƒ
[5]
= 60 second.
Note:
This parameter only takes effect from the next reset of the device.
ExtBootPReqEnable
ƒ
[0]
= Disable (default).
ƒ
[1]
= Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the
BootP request to provide device-related initial startup information such
as blade type, current IP address, software version, etc. For a full list of
the vendor specific Information fields, refer to the
SIP Series Reference
Manual
.
The BootP/TFTP configuration utility displays this information in the
'Client Info' column (refer to the
SIP Series Reference Manual
).
Note:
This option is not available on DHCP servers.