AudioCodes Mediapack mp-11x, User Manual

Page: 284 / 390

SIP User's Manual 284 Document #: LTRT-65409
MediaPack Series
Table 6-7: SIP Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
CallWaitingPerPort
Defines call waiting per port.
[CallWaitingPerPort]
FORMAT CallWaitingPerPort_Index = CallWaitingPerPort_IsEnabled;
CallWaitingPerPort_Port, CallWaitingPerPort_Module;
[\CallWaitingPerPort]
Where,
ƒ
IsEnabled = enables [1] or disables [0] call waiting
ƒ
Port = Port number
ƒ
Module = Module number
For example:
[CallWaitingPerPort]
CallWaitingPerPort 0 = 0,1,1$$;
CallWaitingPerPort 1 = 1,2,1$$;
[\CallWaitingPerPort]
If enabled, when an FXS receives a call on a busy endpoint, it
responds with a 182 response (and not with a 486 busy). The gateway
plays a call waiting indication signal. When hook-flash is detected, the
gateway switches to the waiting call.
The gateway that initiated the waiting call plays a Call Waiting Ringback
tone to the calling party after a 182 response is received.
Notes:
ƒ
If this parameter is not configured (default), use the global parameter
EnableCallWaiting (refer to 'Supplementary Services' on page
108 ).
ƒ
The numbering of channels starts with 0.
ƒ
This parameter can appear up to eight times for 8-port gateways,
and up to 24 times for MP-124.
ƒ
The gateway's Call Progress Tones file must include a 'call waiting
Ringback' tone (caller side) and a 'call waiting' tone (called side, FXS
only).
ƒ
The 'Enable Hold' parameter must be enabled on both the calling
and the called sides.
ƒ
To define call waiting using the Embedded Web Server, refer to 'Call
Waiting' on page
359 .
CHRRTimeout
For a description of this parameter, refer to 'Supplementary Services' on
page
108 .
EnableCallWaiting
For a description of this parameter, refer to 'Supplementary Services' on
page
108 .