AudioCodes Mediapack mp-11x, User Manual

Page: 229 / 390

Version 5.2 229 August 2007
SIP User's Manual 5. Web-based Management
4.
Click the
Browse
button, navigate to the
cmp
file, and then click
Send File
; the
cmp
file is loaded to the gateway and you're notified as to a successful loading, as shown
below.
Figure 5-67: CMP Successfully Loaded Screen
5.
Note that the four action buttons (
Cancel
,
Reset
,
Back
, and
Next
) are now activated
(following
cmp
file loading). You can now choose to either:
•
Click
Reset
; the gateway resets, utilizing the new
cmp
you loaded and utilizing
the current configuration files.
•
Click
Cancel
; the gateway resets utilizing the
cmp, ini
and all other configuration
files that were previously stored in flash memory. Note that these are NOT the
files you loaded in the previous wizard steps.
•
Click
Back
; the 'Load a
cmp
File' screen is displayed again.
•
Click
Next
; the 'Load an
ini
File' screen opens; refer to the figure below. Loading
a new
ini
file or any other auxiliary file listed in the wizard is optional.
Note that as you progress, the file type list on the left indicates which file type loading
is in process by illuminating green (until 'Finish').
6.
In the 'Load an
ini
File' screen, you can now choose to either:
•
Click
Browse
and navigate to the
ini
file; the check box 'Use existing
configuration', by default checked, becomes unchecked. Click
Send File
; the
ini
file is loaded to the gateway and you're notified as to a successful loading.
•
Ignore the
Browse
button (its field remains undefined and the check box 'Use
existing configuration' remains checked by default).
•
Ignore the
Browse
button and uncheck the 'Use existing configuration' check
box; no
ini
file is loaded, the gateway uses its factory-preconfigured values.