Lantronix G528, Quick Start Manual

Page: 1 / 2

1
G528 Quick Start Guide
IoT Cellular Gateway
*Wi - Fi /Bluetooth
DC input
**RS - 485
RS - 232
*Wi - Fi
G528
WHAT ’ S IN THE BOX
Part number
!
Thank you for choosing Lantronix. Please register your product to receive notifications for firmware and
documentation updates at
www.lantronix.com/product - registration .
HARDWARE SETUP
1. Unbox and verify the contents. Gather the accessories that you will need.
2. Remove the SIM card from its packaging. Locate the SIM 1 slot on the unit.
To insert the SIM card, slide the latch for SIM 1 slot to the left and gently
push the SIM card (contact side down) all the way into the slot. Release the
latch.
Note : The SIM card is pre - activated by Lantronix, but the APN may need to be
configured in the software. See Quick Setup .
3. Attach the cellular / GNSS antennas to the antenna connectors and tighten
them securely.
4. Optional: To enable Last Gasp, slide the battery switch to the left (ON). The
battery is charged while the device is connected to an external power input.
5. Attach the Wi - Fi / Bluetooth antennas to the antenna connectors and tighten
them securely. If you ’ re using only Bluetooth, attach one antenna to the Wi -
Fi / Bluetooth connector.
6. Attach the 3 - pin plug on the power cord to the DC input on the unit. Connect
the AC plug on the power supply to a standard AC receptacle.
7. Observe that the Power LED is lit.
Model shown: G528GP2FS
Accessory quantity guides
Quick
Start
Guide
SIM
Insert
HARDWARE OVERVIEW
*Antenna selection will vary depending on your needs. **3 - pin and 5 - pin MICRO COMBICON plugs are sold separately.
USB
Front View
Ethernet (LAN, WAN/LAN #2)
LEDs
microSD
Last Gasp
SIM 1
SIM 2
*Cellular
main
*Cellular
diversity
*GNSS
**I/O connectors
Back View
LEDs
Alert Red Device alerts
User
Programmable 1
Blue Software configurable
User
Programmable 2
Blue Software configurable
Activity Amber Cellular data activity
Network Amber Cellular network status
Signal Amber Cellular signal strength
SIM Blue SIM in use
Wi - Fi Blue Wi - Fi network status
Power Green Power On or Off
Reset
(See G520 Series User Guide for details.)
5G + GNSS antenna ACC - 930 - 0296 - 00 4 - in - 1
2.4/5.8GHz Wi - Fi/Bluetooth antenna A21H0 2
12VDC 12W Power supply (non - POE)* ACC - 520 - 0165 - 00 1
SIM card N/A 1
Power cord ACC - 500 - 0420 - 00 1
*POE power supply must be ordered separately.
For accessories, visit https://www.lantronix.com/products/g520/