Service information
For any service or repair information please contact Packet Power
at
.
Regulatory Information
FCC Radio Frequency Interference Statement
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modification could void the user's authority to
operate the equipment.
Packet
Power
Data Receiver gateway P2-G1
Installation manual
Introduction
The P2-G1 Data Receiver Gateway receives power usage data
from Packet power Monitoring Nodes and forwards them to
Packet Power host software running on a host PC. Prior to
connecting the gateway please make sure the appropriate Packet
power software data collection software is installed on the host
PC.
