AudioCodes Mediant 500 E-SBC, User Manual

Page: 38 / 920

User's Manual 38 Document #: LTRT-10437
Mediant 500 E-SBC
6.1.2 Accessing the Web Interface
The following procedure describes how to access the Web interface.

To access the Web interface:
1. Open a standard Web browser (see ''Computer Requirements'' on page 37 ).
2. In the Web browser, specify the OAMP IP address of the device (e.g.,
http://10.1.10.10); the Web interface's Login window appears, as shown below
:
Figure 6-1: Web Login Screen
3. In the 'Username' and 'Password' fields, enter the case-sensitive, user name and
password respectively.
4. Click Login ; the Web interface is accessed, displaying the Home page. For a detailed
description of the Home page, see ''Viewing the Home Page'' on page 51 .
Notes:
•
By default, Web access is only through the IP address of the OAMP interface.
However, you can allow access from all of the device's IP network interfaces, by
setting the EnableWebAccessFromAllInterfaces parameter to 1.
•
The default login username and password is "Admin". To change the login
credentials, see ''Configuring the Web User Accounts'' on page
54 .
•
If you want the Web browser to remember your password, select the 'Remember
Me' check box and then agree to the browser's prompt (depending on your
browser) to save the password for future logins. On your next login attempt, simply
press the Tab or Enter keys to auto-fill the 'Username' and 'Password' fields, and
then click
Login .
•
Depending on your Web browser's settings, a security warning box may be
displayed. The reason for this is that the device's certificate is not trusted by your
PC. The browser may allow you to install the certificate, thus skipping the warning
box the next time you connect to the device. If you are using Windows Internet
Explorer, click
View Certificate , and then Install Certificate . The browser also
warns you if the host name used in the URL is not identical to the one listed in the
certificate. To resolve this, add the IP address and host name (ACL_nnnnnn,
where
nnnnnn is the serial number of the device) to your hosts file, located at
/etc/hosts on UNIX or C:\Windows\System32\Drivers\ETC\hosts on Windows; then
use the host name in the URL (e.g., https://ACL_280152). Below is an example of
a host file:
127.0.0.1 localhost
10.31.4.47 ACL_280152