AudioCodes Mediant 500 E-SBC, User Manual

Page: 903 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 903 Mediant 500 E-SBC
Parameter Description

[1] Enable (default)
Web: Enable Conference DTMF
Clamping
CLI: conf-dtmf-clamping
[EnableConferenceDTMFClamp] Determines the device logic once a DTMF is received on any
conference participant. If enabled, the DTMF is not regenerated
toward the other conference participants. This logic is only
relevant for simple conferencing (NetAnn).

[0] Disable

[1] Enable (default)
Web: Enable Conference DTMF
Reporting
CLI: conf-dtmf-reporting
[EnableConferenceDTMFReporting
] Determines the device logic once a DTMF is received on any
conference participant. If enabled, the device reports this DTMF
in an out-of-band SIP message (according to TxDTMFOptions).
This logic is only relevant for simple conferencing (NetAnn).

[0] Disable (default)

[1] Enable
Web: Active Speakers Min. Interval
CLI: active-speaker-notification-
minimum-interval
[ActiveSpeakersNotificationMinInte
rval] Defines the minimum interval (in 100 msec units) between each
Active Speaker Notification (ASN) events report. These events
report on the active speakers in a conference. The event is
issued whenever the active speakers change.
Minimum configurable interval between events is 500 msec (5
units). The range is 5 to 2147483647 units. The default is 20
(i.e., 100 msec).
Automatic Gain Control (AGC) Parameters
Web: Enable AGC
EMS: AGC Enable
CLI: AGC-enable
[EnableAGC] Enables the AGC mechanism. The AGC mechanism adjusts the
level of the received signal to maintain a steady (configurable)
volume level.

[0] Disable (default)

[1] Enable
Notes:

This parameter can also be configured for a Tel Profile (in
the Tel Profile table).

For a description of AGC, see Automatic Gain Control (AGC)
on page
178 .
Web: AGC Slope
EMS: Gain Slope
CLI: AGC-gain-slope
[AGCGainSlope] Determines the AGC convergence rate:

[0] 0 = 0.25 dB/sec

[1] 1 = 0.50 dB/sec

[2] 2 = 0.75 dB/sec

[3] 3 = 1.00 dB/sec (default)

[4] 4 = 1.25 dB/sec

[5] 5 = 1.50 dB/sec

[6] 6 = 1.75 dB/sec

[7] 7 = 2.00 dB/sec

[8] 8 = 2.50 dB/sec

[9] 9 = 3.00 dB/sec

[10] 10 = 3.50 dB/sec

[11] 11 = 4.00 dB/sec

[12] 12 = 4.50 dB/sec

[13] 13 = 5.00 dB/sec

[14] 14 = 5.50 dB/sec

[15] 15 = 6.00 dB/sec

[16] 16 = 7.00 dB/sec