AudioCodes Mediant 500 E-SBC, User Manual

Page: 894 / 920

User's Manual 894 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
between the user agents. In some scenarios, the call is
established despite the media not being synchronized. This may
occur, for example, in call transfer (SIP REFER) where the
media between the transfer target and transferee are not
synchronized. The deviceperforms media synchronization by
sending a re-INVITE immediately after the call is established in
order for the user agents to negotiate the media (SDP
offer/answer).

[0] Disable = (Default) Media synchronization is performed
only if the RTP mode (e.g., a=sendrecv, a=sendrecv,
a=sendonly, a=recvonly, and a=inactive) between the user
agents are different and synchronization is required.

[1] Enable = Media synchronization is performed if the
media, including RTP mode or any other media such as
coders, is different and has not been negotiated between the
user agents.

[2] Never = Media synchronization is never performed.
Admission Control Table
Web: Admission Control
EMS: Call Admission Control
CLI: configure voip > sbc sbc-
admission-control
[SBCAdmissionControl]
This table parameter defines Call Admission Control (CAC)
rules for limiting the number of allowed concurrent calls (SIP
dialogs).
The format of the ini file table parameter is as follows:
[SBCAdmissionControl]
FORMAT SBCAdmissionControl_Index =
SBCAdmissionControl_AdmissionControlName,
SBCAdmissionControl_LimitType,
SBCAdmissionControl_IPGroupID,
SBCAdmissionControl_SRDID,
SBCAdmissionControl_RequestType,
SBCAdmissionControl_RequestDirection,
SBCAdmissionControl_Limit,
SBCAdmissionControl_LimitPerUser,
SBCAdmissionControl_Rate, SBCAdmissionControl_MaxBurst,
SBCAdmissionControl_Reservation;
[\SBCAdmissionControl]
For a detailed description of this table, see ''Configuring
Admission Control'' on page
473 .
Allowed Audio Coders Table
Web: Allowed Audio Coders
CLI: configure voip > sbc allowed-
coders-group
AllowedCodersGroup0
[AllowedCodersGroupX]
This table parameter defines Allowed Coders Groups, which
determine the audio (voice) coders that can be used for a
specific SIP entity.
The format of the ini file table parameter is as follows:
[AllowedCodersGroupX]
FORMAT AllowedCodersGroup_Index =
AllowedCodersGroup_Name;
[\AllowedCodersGroup]
Where X represents the index number.
For a detailed description of this table, see ''Configuring Allowed
Audio Coder Groups'' on page
477 .
Allowed Video Coders Table
CLI: configure voip/sbc allowed- This table parameter defines Allowed Video Coders Groups,