AudioCodes Mediant 500 E-SBC, User Manual

Page: 566 / 920

User's Manual 566 Document #: LTRT-10437
Mediant 500 E-SBC

To configure the GW User Info table in the Web interface:
1. Open the GW User Info Table page ( Configuration tab > VoIP menu > SIP
Definitions > User Information > GW User Info Table ).
2. Click Add : the following dialog box appears:
Figure 39-2: GW User Info Table in Web Interface
3. Configure the GW User Info table parameters according to the table below.
4. Click Submit .
5. To save the changes to flash memory, see ''Saving Configuration'' on page 542 .
To register a user, select the user's table entry, and then from the Action button's drop-
down list , choose Register . To un-register a user, select the user, and then from the
Action button's drop-down list , choose Un-Register .
Table 39-2: GW User Info Table Parameter Descriptions
Parameter Description
Index
[GWUserInfoTable_Index]
Defines an index for the new table record.
PBX Extension
[GWUserInfoTable_PBXExtension]
Defines the PBX extension number.
The valid value is a string of up to 10 characters.
Global Phone Number
[GWUserInfoTable_GlobalPhoneNu
mber]
Defines the "global" phone number for the IP side.
The valid value is a string of up to 20 characters.
Display Name
[GWUserInfoTable_DisplayName]
Defines the Caller ID of the PBX extension.
The valid value is a string of up to 30 characters.
Username
[GWUserInfoTable_Username]
Defines the username for registering the user when
authentication is necessary.
The valid value is a string of up to 40 characters.
Password
[GWUserInfoTable_Password]
Defines the password for registering the user when
authentication is necessary.
The valid value is a string of up to 20 characters.
Status (Read-only field) Displays the status of the user -
"Registered" or "Not Registered".