AudioCodes Mediant 500 E-SBC, User Manual

Page: 621 / 920

User's Manual 47. VoIP Status
Version 6.8 621 Mediant 500 E-SBC
Figure 47-6: CDR History Table
Table 47-3: CDR History Table
Field Description
Call End Time Displays the time at which the call ended. The time is displayed in the
format, hh:mm:ss, where
hh is the hour, mm the minutes and ss the
seconds (e.g., 15:06:36).
End Point Displays the device's endpoint involved in the call, displayed in the
format:

Analog: <interface>-<module>/<port>. For example, "FXS-3/1"
denotes FXS module 3, port 1.

Digital: <interface>-<module>/<Trunk ID>/<B-channel>. For
example, "ISDN-1/2/3" denotes ISDN module 1, Trunk ID 2, B-
channel 3.
Caller Displays the phone number (source number) of the party who made
the call.
Callee Displays the phone number (destination number) of the party to whom
the call was made.
Direction Displays the direction of the call with regards to IP and Tel sides:

"Incoming": IP-to-Tel call

"Outgoing": Tel-to-IP call
Remote IP Displays the IP address of the call party. For an "Incoming" call, this is
the source IP address; for an "Outgoing" call, this is the destination IP
address.
Duration Displays the duration of the call, displayed in the format hh:mm:ss,
where
hh is hours, mm minutes and ss seconds. For example,
00:01:20 denotes 1 minute and 20 seconds.
Termination Reason Displays the reason for the call being released (ended). For example,
"NORMAL_CALL_CLEAR" indicates a normal off-hook (hang up) of the
call party.
Session ID Displays the SIP session ID of the call.