AudioCodes Mediant 500 E-SBC, User Manual

Page: 859 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 859 Mediant 500 E-SBC
Parameter Description
local ringback tone if there are no prior received RTP packets.
The device stops playing the local ringback tone as soon as it
starts receiving RTP packets. At this stage, if the device
receives additional 18x responses, it does not resume playing
the local ringback tone. Note that for ISDN trunks, this option is
applicable only if LocalISDNRBSource is set to 1.
Notes:

This parameter is applicable only to the Gateway (GW)
application (i.e., not the IP-to-IP application).

The x in the ini file parameter name denotes the trunk number,
where 0 is Trunk 1.

This parameter is applicable only to digital PSTN interfaces.
Web: Play Ringback Tone to IP
EMS: Play Ring Back Tone To
IP
CLI: play-rbt-2ip
[PlayRBTone2IP]
Global parameter that enables the device to play a ringback tone to
the IP side for IP-to-Tel calls. You can also configure this
functionality per specific calls, using IP Profiles
(IpProfile_PlayRBTone2IP). For a detailed description of this
parameter and for configuring this functionality in the IP Profile
table, see ''Configuring IP Profiles'' on page
304 .
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
Web: Play Local RBT on ISDN
Transfer
EMS: Play RBT On ISDN
Transfer
CLI: play-l-rbt-isdn-trsfr
[PlayRBTOnISDNTransfer] Determines whether the device plays a local ringback tone for
ISDN's Two B Channel Transfer (TBCT), Release Line Trunk
(RLT), or Explicit Call Transfer (ECT) call transfers to the originator
when the second leg receives an ISDN Alerting or Progress
message.

[0] Don't Play (default)

[1] Play
Notes:

For Blind transfer, the local ringback tone is played to first call
PSTN party when the second leg receives the ISDN Alerting or
Progress message.

For Consulted transfer, the local ringback tone is played when
the second leg receives ISDN Alerting or Progress message if
the Progress message is received after a SIP REFER.

This parameter is applicable only if the parameter
SendISDNTransferOnConnect is set to 1.
Web: MFC R2 Category
EMS: R2 Category
CLI: mfcr2-category
[R2Category] Defines the tone for MFC R2 calling party category (CPC). The
parameter provides information on the calling party such as
National or International call, Operator or Subscriber and
Subscriber priority.
The value range is 1 to 15 (defining one of the MFC R2 tones). The
default is 1.