AudioCodes Mediant 500 E-SBC, User Manual

Page: 390 / 920

User's Manual 390 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
Route Name
CLI: route-name
[PREFIX_RouteName]
Defines an arbitrary name to easily identify the routing rule.
The valid value is a string of up to 20 characters. By default, no
value is defined.
Matching Call Characteristics
Web: Src. IP Group ID
EMS: Source IP Group ID
CLI: src-ip-group-id
[PREFIX_SrcIPGroupID] Defines the IP Group from where the incoming IP call is received.
Typically, the IP Group of an incoming INVITE is determined
according to the Inbound IP Routing table.
Notes:

This parameter is applicable only to the Gateway's IP-to-IP
routing application.

To denote all IP Groups, leave this field empty.

If this IP Group has a Serving IP Group, then all calls from this
IP Group are sent to the Serving IP Group. In such a scenario,
this routing table is used only if the parameter
PreferRouteTable is set to 1.
Web: Src. Host Prefix
EMS: Source Host Prefix
CLI: src-host-prefix
[PREFIX_SrcHostPrefix] Defines the prefix of the SIP Request-URI host name in the From
header of the incoming SIP INVITE message.
To denote any prefix, use the asterisk (*) symbol.
Note: This parameter is applicable only to the Gateway's IP-to-IP
routing application.
Web: Dest. Host Prefix
EMS: Destination Host Prefix
CLI: dst-host-prefix
[PREFIX_DestHostPrefix] Defines the SIP Request-URI host name prefix of the incoming
SIP INVITE message.
To denote any prefix, use the asterisk (*) symbol.
Note: This parameter is applicable only to the Gateway's IP-to-IP
routing application.
Web: Src. Trunk Group ID
EMS: Source Trunk Group ID
CLI: src-trunk-group-id
[PREFIX_SrcTrunkGroupID]
Defines the Trunk Group from where the call is received.
To denote any Trunk Group, use the asterisk (*) symbol.
Web: Dest. Phone Prefix
EMS: Destination Phone Prefix
CLI: dst-phone-prefix
[PREFIX_DestinationPrefix]
Defines the prefix and/or suffix of the called (destination)
telephone number. The suffix is enclosed in parenthesis after the
suffix value. You can use special notations for denoting the prefix.
For example, [100-199](100,101,105) denotes a number that
starts with 100 to 199 and ends with 100, 101 or 105. To denote
any prefix, use the asterisk (*) symbol or to denote calls without a
called number, use the $ sign. For a description of available
notations, see ''Dialing Plan Notation for Routing and Manipulation
Tables'' on page
689 .
The number can include up to 50 digits.
Notes:

For LDAP-based routing, enter the LDAP query keyword as the
prefix number to denote the IP domain:

"PRIVATE" = Private number

"OCS" = Lync / OCS client number

"PBX" = PBX / IP PBX number

"MOBILE" = Mobile number

"LDAP_ERR" = LDAP query failure
For more information, see Routing Based on LDAP Active
Directory Queries on page
197 .

If you want to configure re-routing of ISDN Tel-to-IP calls to fax