AudioCodes Mediant 500 E-SBC, User Manual

Page: 701 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 701 Mediant 500 E-SBC
54.1.7 Auxiliary and Configuration File Name Parameters
The configuration files (i.e., auxiliary files) can be loaded to the device using the Web
interface. For loading these files using the ini file, you need to configure these files in the ini
file and configured whether they must be stored in the non-volatile memory. The table
below lists the
ini file parameters associated with these auxiliary files. For more information
on the auxiliary files, see ''Loading Auxiliary Files'' on page 551 .
Table 54-7: Auxiliary and Configuration File Parameters
Parameter Description
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their defaults
before processing the updated ini file.

[0] = Disable - parameters not included in the downloaded ini file
are not returned to default settings (i.e., retain their current
settings).

[1] = Enable (default).
Note: This parameter is applicable only for automatic HTTP update
or Web ini file upload (not applicable if the ini file is loaded using
BootP).
[SaveConfiguration] Determines if the device's configuration (parameters and files) is
saved to flash (non-volatile memory).

[0] = Configuration isn't saved to flash memory.

[1] = (Default) Configuration is saved to flash memory.
Auxiliary and Configuration File Name Parameters
Web/EMS: Call Progress Tones
File
[CallProgressTonesFilename]
Defines the name of the file containing the Call Progress Tones
definitions. For more information on how to create and load this file,
refer to
DConvert Utility User's Guide .
Note: For this parameter to take effect, a device reset is required.
Web/EMS: Prerecorded Tones
File
[PrerecordedTonesFileName]
Defines the name (and path) of the file containing the Prerecorded
Tones.
Note: For this parameter to take effect, a device reset is required.
Web: CAS File
EMS: Trunk Cas Table Index
[CASFileName_x] Defines the CAS file name (e.g., 'E_M_WinkTable.dat'), which
defines the CAS protocol (where x denotes the CAS file ID 0 to 7).
It is possible to define up to eight different CAS files by repeating
this parameter. Each CAS file can be associated with one or more
of the device's trunks, using the parameter CASTableIndex or it can
be associated per B-channel using the parameter
CASChannelIndex.
Note: For this parameter to take effect, a device reset is required.
Web: Dial Plan
EMS: Dial Plan Name
[CasTrunkDialPlanName_x] Defines the Dial Plan name (up to 11-character strings) per trunk.
Note: The x in the ini file parameter name denotes the trunk
number, where 0 is Trunk 1.
Web: Dial Plan File
EMS: Dial Plan File Name
[DialPlanFileName]
Defines the name (and path) of the Dial Plan file. This file should be
created using AudioCodes DConvert utility (refer to
DConvert Utility
User's Guide ).
[UserInfoFileName]
Defines the name (and path) of the file containing the User
Information data.