AudioCodes Mediant 500 E-SBC, User Manual

Page: 275 / 920

User's Manual 17. Control Network
Version 6.8 275 Mediant 500 E-SBC

To configure a Proxy Set:
1. Open the Proxy Sets Table page ( Configuration tab > VoIP menu > VoIP Network >
Proxy Sets Table ).
Figure 17-6: Proxy Sets Table Page
2. Configure a Proxy Set according to the parameters described in the table below.
3. Click Submit , and then save ("burn") your settings to flash memory.
Table 17-6: Proxy Sets Table Parameter Description
Parameter Description
Web: Proxy Set ID
EMS: Index
CLI: configure voip > voip-
network proxy-set
[ProxySet_Index]
Defines an index number for the new table record.
Proxy Address
CLI: voip-network proxy-ip >
proxy-address
[ProxyIp_IpAddress]
Defines the address of the Proxy server. Up to 10 addresses can be
configured per Proxy Set.
The address can be defined as an IP address in dotted-decimal
notation (e.g., 201.10.8.1) or FQDN. You can also specify the port in
the following format:

IPv4 address: <IP address>:<port> (e.g., 201.10.8.1:5060)

IPv6 address: < [IPV6 address ]>:<port> (e.g.,
[2000:: 1:200:200:86:14]:5060)
Transport Type
CLI: voip-network proxy-ip >
transport-type
[ProxyIp_TransportType]
Defines the transport type for communicating with the Proxy server.

[0] UDP

[1] TCP

[2] TLS

[-1] = Undefined
Note: If this parameter is not defined, the settings of the global
parameter SIPTransportType is used.