AudioCodes Mediant 500 E-SBC, User Manual

Page: 507 / 920

User's Manual 28. SBC Configuration
Version 6.8 507 Mediant 500 E-SBC
Parameter Description
by the 'Manipulated URI' parameter).
Source IP Group ID
CLI: src-ip-group-id
[IPOutboundManipulation_SrcIPGroup
ID]
Defines the IP Group from where the INVITE is received.
The default value is -1 (i.e., any IP Group).
Destination IP Group ID
CLI: dst-ip-group-id
[IPOutboundManipulation_DestIPGrou
pID]
Defines the IP Group to where the INVITE is to be sent.
The default value is -1 (i.e., any IP Group).
Source Username Prefix
CLI: src-user-name-prefix
[IPOutboundManipulation_SrcUserna
mePrefix]
Defines the prefix of the source SIP URI user name,
typically used in the SIP From header.
The default value is the asterisk (*) symbol (i.e., any
source username prefix). The prefix can be a single digit
or a range of digits. For available notations, see ''Dialing
Plan Notation for Routing and Manipulation'' on page
689 .
Source Host
CLI: src-host
[IPOutboundManipulation_SrcHost]
Defines the source SIP URI host name - full name,
typically in the From header.
The default value is the asterisk (*) symbol (i.e., any
source host name).
Destination Username Prefix
CLI: dst-user-name-prefix
[IPOutboundManipulation_DestUserna
mePrefix]
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination username prefix). The prefix can be a single
digit or a range of digits. For available notations, see
''Dialing Plan Notation for Routing and Manipulation'' on
page
689 .
Destination Host
CLI: dst-host
[IPOutboundManipulation_DestHost]
Defines the destination SIP URI host name - full name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination host name).
Calling Name Prefix
CLI: calling-name-prefix
[IPOutboundManipulation_CallingNam
ePrefix]
Defines the prefix of the calling name (caller ID). The
calling name appears in the SIP From header.
The valid value is a string of up to 37 characters. By
default, no prefix is defined.
Message Condition
CLI: message-condition
[IPOutboundManipulation_MessageCo
ndition]
Assigns a Message Condition rule as a matching
characteristic. Message Condition rules define required
SIP message formats. For configuring Message Condition
rules, see ''Configuring Message Condition Rules'' on
page
486 .
Request Type
CLI: request-type
[IPOutboundManipulation_RequestTyp
e]
Defines the SIP request type to which the manipulation
rule is applied.

[0] All = (Default) all SIP messages.

[1] INVITE = All SIP messages except REGISTER
and SUBSCRIBE.

[2] REGISTER = Only SIP REGISTER messages.

[3] SUBSCRIBE = Only SIP SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages
except SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages