AudioCodes Mediant 500 E-SBC, User Manual

Page: 483 / 920

User's Manual 28. SBC Configuration
Version 6.8 483 Mediant 500 E-SBC
2. Click Add ; the following dialog box appears:
Figure 28-6: Classification Table Page
3. Configure the Classification rule according to the parameters described in the table
below.
4. Click Submit , and then save ("burn") your settings to flash memory.
Table 28-4: Classification Table Parameter Descriptions
Parameter Description
Index
[Classification_Index]
Defines an index number for the new table record.
Classification Name
CLI: classification-name
[Classification_ClassificationName]
Defines an arbitrary name to easily identify the
Classification rule.
The valid value is a string of up to 20 characters. By default,
no name is defined.
Matching Characteristics - Rule
Message Condition
CLI: message-condition
[Classification_MessageCondition]
Assigns a Message Condition rule, which can be used to
classify the incoming SIP dialog. To configure Condition
rules, see ''Configuring Message Condition Rules'' on page
486 .
Source SRD ID
CLI: src-srd-id
[Classification_SrcSRDID]
Defines an SRD ID of the incoming SIP dialog. To configure
SRDs, see ''Configuring SRDs'' on page
256 .
By default, no SRD is defined.
Note: The SRDs are also associated with a port number as
defined by the SIP Interface used by the SRD (see
''Configuring SIP Interfaces'' on page
258 ).
Source IP Address
CLI: src-ip-address
[Classification_SrcAddress]
Defines the source IP address (in dotted-decimal notation)
of the incoming SIP dialog.
The IP address can be configured using the following
wildcards:

"x" wildcard: represents single digits. For example,
10.8.8.xx represents all the addresses between
10.8.8.10 to 10.8.8.99.