AudioCodes Mediant 500 E-SBC, User Manual

Page: 236 / 920

User's Manual 236 Document #: LTRT-10437
Mediant 500 E-SBC
15.6.1 Call Setup Rule Examples
Below are configuration examples for using Call Setup Rules.

Example 1: This example configures the device to replace (manipulate) the incoming
call's source number with a number retrieved from the AD by an LDAP query. The
device queries the AD server for the attribute record, "telephoneNumber" whose value
is the same as the received source number (e.g., "telephoneNumber =4064"). If such
an attribute is found, the device retrieves the number of the attribute record,
"alternateNumber" and uses this number as the source number.
•
Call Setup Rules table configuration:
♦
'Rules Set ID': 1
♦
'Attributes to Query': ‘telephoneNumber=’ + param.call.src.user
♦
'Attributes to Get': alternateNumber
♦
'Row Role': Use Current Condition
♦
'Condition': ldap.attr. alternateNumber exists
♦
'Action Subject': param.call.src.user
♦
'Action Type': Modify
♦
'Action Value': ldap.attr. alternateNumber
•
Routing table configuration: A single routing rule is assigned the Call Setup
Rule Set ID.
♦
Index 1:

'Call Setup Rules Set Id': 1

Example 2: This example configures the device to replace (manipulate) the incoming
call's calling name (caller ID) with a name retrieved from the AD by an LDAP query.
The device queries the AD server for the attribute record, "telephoneNumber" whose
value is the same as the received source number (e.g., "telephoneNumber =5098"). If
such an attribute is found, the device retrieves the name from the attribute record,
"displayName" and uses this as the calling name in the incoming call.
•
Call Setup Rules table configuration:
♦
'Rules Set ID': 2
♦
'Attributes to Query': ‘telephoneNumber=’ + param.call.src.user
♦
'Attributes to Get': displayName
♦
'Row Role': Use Current Condition
♦
'Condition': ldap.attr. displayName exists
♦
'Action Subject': param.call.src.name
♦
'Action Type': Modify
♦
'Action Value': ldap.attr. displayName
•
Routing table configuration: A single routing rule is assigned the Call Setup
Rule Set ID.
♦
Index 1:

'Call Setup Rules Set Id': 2