AudioCodes Mediant 500 E-SBC, User Manual

Page: 869 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 869 Mediant 500 E-SBC
Parameter Description
a ringback tone if 180 response without SDP is received.
If the first received response is 180 without SDP, the
device responds according to the PlayRBTone2TEL
parameter and processes the subsequent 18x forking
responses.
Note: Regardless of this parameter setting, once a SIP 200
OK response is received, the device uses the RTP
information and re-opens the voice stream, if necessary.
Web: Forking Timeout
CLI: forking-timeout
[ForkingTimeOut]
Defines the timeout (in seconds) that is started after the first
SIP 2xx response has been received for a User Agent when
a Proxy server performs call forking (Proxy server forwards
the INVITE to multiple SIP User Agents). The device sends
a SIP ACK and BYE in response to any additional SIP 2xx
received from the Proxy within this timeout. Once this
timeout elapses, the device ignores any subsequent SIP
2xx.
The number of supported forking calls per channel is 20. In
other words, for an INVITE message, the device can receive
up to 20 forking responses from the Proxy server.
The valid range is 0 to 30. The default is 30.
Web: Tel2IP Call Forking Mode
CLI: tel2ip-call-forking-mode
[Tel2IPCallForkingMode]
Enables Tel-to-IP call forking, whereby a Tel call can be
routed to multiple IP destinations.

[0] Disable (default)

[1] Enable
Note: Once enabled, routing rules must be assigned Forking
Groups in the Outbound IP Routing table.
CLI: configure voip/sip-definition
advanced-settings/forking-delay-time-
invite
[ForkingDelayTimeForInvite]
Defines the interval (in seconds) to wait before sending
INVITE messages to the other members of the forking
group. The INVITE is immediately sent to the first member.
The valid value range is 0 to 40. The default is 0 (i.e., send
immediately).