AudioCodes Mediant 500 E-SBC, User Manual

Page: 19 / 920

Version 6.8 19 Mediant 500 E-SBC
User's Manual Notices
Notes:
•
By default, the device supports export-grade (40-bit and 56-bit) encryption due to
US government restrictions on the export of security technologies. To enable 128-
bit and 256-bit encryption on your device, contact your AudioCodes sales
representative.
•
This device includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (
http://www.openssl.org/ ).
•
This device includes cryptographic software written by Eric Young
(
eay@cryptsoft.com ).
Note: Some of the features listed in this document are available only if the relevant
Software License Key has been purchased from AudioCodes and installed on the
device. For a list of Software License Keys that can be purchased, please consult
your AudioCodes sales representative.
Note: OPEN SOURCE SOFTWARE. Portions of the software may be open source
software and may be governed by and distributed under open source licenses, such
as the terms of the GNU General Public License (GPL), the terms of the Lesser
General Public License (LGPL), BSD and LDAP, which terms are located at:
http://www.audiocodes.com/support and all are incorporated herein by reference. If
any open source software is provided in object code, and its accompanying license
requires that it be provided in source code as well, Buyer may receive such source
code by contacting AudioCodes, by following the instructions available on
AudioCodes website.
Document Revision Record
LTRT Description
10420 Initial document release for Version 6.8.
10429 Screenshot updated for example of SIP message manipulation rules; available video
coders not based on license key; AupdHttpUserAgent parameter updated; RFC
updated for CDR Syslog message (RFC 3164); core dump procedure updated; HA
Settings page screenshot updated for configuring HA
10431 New parameter added - PM_EnableThresholdAlarms; Web Users table CLI commands
updated; Web Users table parameter descriptions of Session Limit and Session
Timeout updated; IPv6 Feature Key removed; Internal DNS table supports up to 3 (not
4) IP addresses per host name; remote UA behind NAT for media section updated;
MgmntLDAPGroups_Level parameter values updated; lock/unlock Trunk Group feature
added; CRP Normal mode preconfiguration updated; write-and-backup CLI command
updated; PSTN trace updated; Ethernet Group section updated.
Descriptions of the following parameters were updated:
SRD_EnableUnAuthenticatedRegistrations; WebSessionTimeout;
DigitalOOSBehaviorForTrunk; DigitalOOSBehavior.