AudioCodes Mediant 500 E-SBC, User Manual

Page: 902 / 920

User's Manual 902 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
[\IP2IPRouting]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, -1, -1, , 0, -1, 0;
54.13 IP Media Parameters
The IP media parameters are described in the table below.
Table 54-63: IP Media Parameters
Parameter Description
Web: Number of Media Channels
EMS: Media Channels
CLI: media-channels
[MediaChannels] Defines the maximum number of DSP channels allocated for
various functionalities such as transcoding, IP conferencing,
The default is 0.
Notes:

For this parameter to take effect, a device reset is required.

The SBC application does not require DSP channels. The
SBC application uses DSP channels only if media
transcoding is needed, where two DSP channels are used
per transcoding session.

Other DSP channels can be used for PSTN interfaces.
Web: NetAnn Announcement ID
[NetAnnAnncID] Defines the NetAnn identification string (up to 16 characters) for
playing an announcement using the NetAnn interface. The
application server sends a regular SIP INVITE message with a
SIP URI that includes this identifier string and a “play=”
parameter that identifies the necessary announcement. The
default is ‘annc’.
Example 1: INVITE sip: annc@10.2.3.4;play=http://localhost/1.
Example 2: INVITE sip:
annc@10.2.3.4;play=http://10.2.3.4/Annc/ello.wav.
Web: Transcoding ID
[TranscodingID] Defines the Transcoding identification string (up to 16
characters) used for identifying an incoming Transcoding call.
The default is ‘trans’.
For more information on Transcoding, see NetAnn Interface.
Conferencing Parameters
Web/EMS: Conference ID
[ConferenceID] Defines the Conference Identification string.
The valid value is a string of up to 16 characters. The default is
"conf".
Note: To join a conference, the INVITE URI must include the
Conference ID string preceded by the number of the
participants in the conference and terminated by a unique
number. For example:
INVITE sip:4conf1234@10.1.10.10
INVITE messages with the same URI join the same conference.
Web: Beep on Conference
CLI: beep-on-conf
[BipOnConference] Enables playing a beep when a participant joins or leaves a
conference (in the latter case, a beep of a different pitch is
heard).

[0] Disable