AudioCodes Mediant 500 E-SBC, User Manual

Page: 733 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 733 Mediant 500 E-SBC
Parameter Description
CLI: ssh-last-login-message
[SSHEnableLastLoginMessage]
the last SSH login. The SSH login message displays the number
of unsuccessful login attempts since the last successful login.

[0] Disable

[1] Enable (default)
Note: The last SSH login information is cleared when the device
is reset.
Web: Max Login Attempts
CLI: ssh-max-login-attempts
[SSHMaxLoginAttempts]
Defines the maximum SSH login attempts allowed for entering an
incorrect password by an administrator before the SSH session is
rejected.
The valid range is 1 to 3. the default is 3.
54.4.6 IDS Parameters
The Intrusion Detection System (IDS) parameters are described in the table below.
Table 54-27: IDS Parameters
Parameter Description
Web: Intrusion Detection
System (IDS)
CLI: enable-ids
[EnableIDS]
Enables the IDS feature.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
CLI: ids-clear-period
[IDSAlarmClearPeriod]
Defines the interval (in seconds) after which an IDS alarm is cleared from
the Active Alarms table if no thresholds are crossed during this time.
However, this "quiet" period must be at least twice the Threshold Window
value. For example, if IDSAlarmClearPeriod is set to 20 sec and the
Threshold Window is set to 15 sec, the IDSAlarmClearPeriod parameter
is ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The valid value is 0 to 86400. The default is 300.
IDS Policy Table
Web: IDS Policy Table
[IDSPolicy]
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For a detailed description of this table, see ''Configuring IDS Policies'' on
page
147 .
IDS Rule Table
Web: IDS Rule Table
[IDSRule]
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For a detailed description of this table, see ''Configuring IDS Policies'' on