AudioCodes Mediant 500 E-SBC, User Manual

Page: 801 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 801 Mediant 500 E-SBC
Parameter Description
seconds ('p') and plays the rest of the number (100) as DTMF
digits.
Additional examples: 1664wpp102, 66644ppp503, and
7774w100pp200.
Notes:

For this parameter to take effect, a device reset is required.

This parameter can also be configured in a Tel Profile.
Web: Special Digit Representation
EMS: Use Digit For Special DTMF
CLI: special-digit-rep
[UseDigitForSpecialDTMF]
Defines the representation for ‘special’ digits (‘*’ and ‘#’) that are
used for out-of-band DTMF signaling (using SIP INFO/NOTIFY).

[0] Special = (Default) Uses the strings ‘*’ and ‘#’.

[1] Numeric = Uses the numerical values 10 and 11.
54.10.3 Digit Collection and Dial Plan Parameters
The digit collection and dial plan parameters are described in the table below.
Table 54-39: Digit Collection and Dial Plan Parameters
Parameter Description
Web/EMS: Dial Plan Index
CLI: dial-plan-index
[DialPlanIndex]
Defines the Dial Plan index to use in the external Dial Plan file. The
Dial Plan file is loaded to the device as a .dat file (converted using
the DConvert utility). The Dial Plan index can be defined globally or
per Tel Profile.
The valid value range is 0 to 7, where 0 denotes PLAN1, 1 denotes
PLAN2, and so on. The default is -1, indicating that no Dial Plan file
is used.
Notes:

If this parameter is configured to select a Dial Plan index, the
settings of the parameter DigitMapping are ignored.

If this parameter is configured to select a Dial Plan index from an
external Dial Plan file, the device first attempts to locate a
matching digit pattern in the Dial Plan file, and if not found, then
attempts to locate a matching digit pattern in the Digit Map rules
configured by the DigitMapping parameter.

This parameter is applicable also to ISDN with overlap dialing.

For E1 CAS MFC-R2 variants (which don't support terminating
digit for the called party number, usually I-15), this parameter and
the DigitMapping parameter are ignored. Instead, you can define
a Dial Plan template per trunk using the parameter
CasTrunkDialPlanName_x (or in the Trunk Settings page).

This parameter can also be configured in a Tel Profile.

For more information on the Dial Plan file, see ''Dialing Plans for
Digit Collection'' on page
557 .
CLI: tel2ip-src-nb-map-dial-
index
[Tel2IPSourceNumberMappi
ngDialPlanIndex]
Defines the Dial Plan index in the external Dial Plan file for the Tel-
to-IP Source Number Mapping feature.
The valid value range is 0 to 7, defining the Dial Plan index [Plan x]
in the Dial Plan file. The default is -1 (disabled).
For more information on this feature, see ''Modifying ISDN-to-IP
Calling Party Number'' on page
563 .
Web: Digit Mapping Rules Defines the digit map pattern (used to reduce the dialing period when