AudioCodes Mediant 500 E-SBC, User Manual

Page: 863 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 863 Mediant 500 E-SBC
Parameter Description
Hunt Group Settings
Web: Hunt Group Settings
EMS: SIP Routing > Hunt Group
CLI: configure voip > gw hunt-or-trunk-
group trunk-group-setting
[TrunkGroupSettings]
This table parameter configures the rules for channel
allocation per Trunk Group.
The format of the ini file table parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName;
[\TrunkGroupSettings]
For a description of this table, see ''Configuring Hunt Group
Settings'' on page
355 .
Web: Channel Select Mode
EMS: Channel Selection Mode
CLI: ch-select-mode
[ChannelSelectMode]
Defines the method for allocating incoming IP-to-Tel calls to
a channel. This parameter applies to the following:

All Trunk Groups configured without a channel select
mode in the Trunk Group Settings table (see ''Configuring
Hunt Group Settings'' on page
355 ).

All channels and trunks configured without a Trunk Group
ID.
for all Trunk Groups channels that are configured without a
Trunk Group ID,.

[0] By Dest Phone Number

[1] Cyclic Ascending (default)

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Cyclic Ascending.

[6] By Source Phone Number

[7] Trunk Cyclic Ascending

[8] Trunk & Channel Cyclic Ascending

[10] Select Trunk By Supplementary Service Table

[11] Dest Ascending
For a detailed description of the parameter's options, see
''Configuring Hunt Group Settings'' on page
355 .
Web: Default Destination Number
CLI: dflt-dest-nb
[DefaultNumber]
Defines the default destination phone number, which is used
if the received message doesn't contain a called party
number and no phone number is configured in the Trunk
Group table (see Configuring the Trunk Group Table on
page
353 ). This parameter is used as a starting number for
the list of channels comprising all the device's Trunk Groups.
The default is 1000.
Web: Source IP Address Input
CLI: src-ip-addr-input
[SourceIPAddressInput]
Determines which IP address the device uses to determine
the source of incoming INVITE messages for IP-to-Tel
routing.

[-1] = (Default) Auto Decision - if the IP-to-IP feature is