AudioCodes Mediant 500 E-SBC, User Manual

Page: 373 / 920

User's Manual 23. Manipulation
Version 6.8 373 Mediant 500 E-SBC
Parameter Description
Matching Characteristics - Rule
Web/EMS: Destination Prefix
CLI: dst-prefix
[_DestinationPrefix]
Defines the destination (called) telephone number prefix.
The default value is the asterisk (*) symbol (i.e., any number).
For manipulating the diverting and redirected numbers for call
diversion, you can use the strings "DN" and "RN" to denote the
destination prefix of these numbers. For more information, see
Manipulating Redirected and Diverted Numbers for Call Diversion on
page
375 .
Web/EMS: Redirect Prefix
CLI: redirect-prefix
[_RedirectPrefix]
Defines the redirect telephone number prefix.
The default value is the asterisk (*) symbol (i.e., any number prefix).
Web: Source Trunk Group ID
CLI: src-trunk-group-id
[_SrcTrunkGroupID]
Defines the Trunk Group from where the Tel call is received.
To denote any Trunk Group, leave this field empty. The value -1
indicates that this field is ignored in the rule.
Notes:

This parameter is applicable only to the Redirect Number Tel > IP
table.

This parameter is not applicable to IP-to-IP call routing.
Source IP Group ID
CLI: src-ip-group-id
[_SrcIPGroupID] Defines the IP Group from where the IP call originated. Typically, the
IP Group of an incoming INVITE is determined or classified by the
Inbound IP Routing table.
If not used (i.e., any IP Group), leave the field empty. The value -1
indicates that it is ignored in the rule.
Notes:

This parameter is applicable only to the Redirect Number Tel > IP
table.

This parameter is applicable only to the IP-to-IP application.
Web/EMS: Source IP
Address
CLI: src-ip-address
[_SourceAddress] Defines the IP address of the caller. The IP address appears in the
SIP Contact header of the incoming INVITE message.
The default value is the asterisk (*) symbol (i.e., any IP address). The
value can include the following wildcards:

"x": represents single digits, for example, 10.8.8.xx denotes all
addresses between 10.8.8.10 and 10.8.8.99.

"*": represents any number between 0 and 255, for example,
10.8.8.* denotes all addresses between 10.8.8.0 and 10.8.8.255.
Note: This parameter is applicable only to the Redirect Number IP-to-
Tel table.
Web: Source Host Prefix
CLI: src-host-prefix
[_SrcHost] Defines the URI host name prefix of the caller. The host name
appears in the SIP From header of the incoming SIP INVITE
message.
The default value is the asterisk (*) symbol (i.e., any host name
prefix).
Notes:

This parameter is applicable only to the Redirect Number IP-to-Tel
table.

If the P-Asserted-Identity header is present in the incoming INVITE
message, then the value of this parameter is compared to the P-
Asserted-Identity URI host name (instead of to the From header).