AudioCodes Mediant 500 E-SBC, User Manual

Page: 52 / 920

User's Manual 52 Document #: LTRT-10437
Mediant 500 E-SBC
In addition to the color-coded status information depicted on the graphical display of the
device, the Home page displays various read-only information in the General Information
pane:

IP Address: IP address of the device

Subnet Mask: Subnet mask address of the device

Default Gateway Address: Default gateway used by the device

Digital Port Number: Number of digital PRI ports (depending on ordered hardware
configuration)

Firmware Version: Software version running on the device

Protocol Type: Signaling protocol currently used by the device (i.e. SIP)

Gateway Operational State:
•
"LOCKED": device is locked (i.e. no new calls are accepted)
•
"UNLOCKED": device is not locked
•
"SHUTTING DOWN": device is currently shutting down
To perform these operations, see ''Basic Maintenance'' on page 539 .

High Availability: Status of the device's HA mode (see HA Status on the Home Page
on page
525 ).
The table below describes the areas of the Home page.
Table 6-7: Home Page Description
Item # Description
1 Displays the highest severity of an active alarm raised (if any) by the device:

Green = No alarms

Red = Critical alarm

Orange = Major alarm

Yellow = Minor alarm
To view active alarms, click the Alarms area to open the Active Alarms page (see
Viewing Active Alarms on page
607 ).
2 Status LED.
3 USB port for USB storage services.
4 RS-232 interface port (RJ-45).
5 Module number for the interface type.
6 Gigabit Ethernet LAN port status icons:

(green): Link is working

(gray): Link is not configured

(red): Link error
To view detailed port information, click the port icon (see Viewing Ethernet Port
Information on page
606 ).
7 Interface module name.
8 E1/T1 port (trunk or channel) status icon.
Icon Trunk Description
(gray)
Disable: Trunk not configured (not in use)