AudioCodes Mediant 500 E-SBC, User Manual

Page: 142 / 920

User's Manual 142 Document #: LTRT-10437
Mediant 500 E-SBC
The following procedure describes how to configure Firewall rules in the Web interface.
You can also configure this using the table ini file parameter, AccessList or the CLI
command, configure voip/access-list.

To configure a Firewall rule:
1. Open the Firewall Settings page ( Configuration tab > VoIP menu > Security >
Firewall Settings ).
2. Click Add ; the following dialog box appears:
Figure 13-1: Firewall Settings Page - Add Record
3. Configure a Firewall rule according to the parameters described in the table below.
4. Click Submit , and then reset the device with a burn-to-flash for your settings to take
effect.
Table 13-1: Firewall Settings Table Parameter Descriptions
Parameter Description
Index Defines an index number for the new table record.
Note: Each table row must be configured with a unique index.
Source IP
CLI: source-ip
[AccessList_Source_IP]
Defines the IP address (or DNS name) or a specific host name of the
source network (i.e., from where the incoming packet is received).
Source Port
CLI: src-port
[AccessList_Source_Port]
Defines the source UDP/TCP ports (of the remote host) from where
packets are sent to the device.
The valid range is 0 to 65535.
Note: When set to 0, this field is ignored and any source port
matches the rule.