AudioCodes Mediant 500 E-SBC, User Manual

Page: 720 / 920

User's Manual 720 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
single server. The device’s Syslog messages can easily be identified
and distinguished from other Syslog messages by its Facility level.
Therefore, in addition to filtering Syslog messages according to IP
address, the messages can be filtered according to Facility level.

[16] = (Default) local use 0 (local0)

[17] = local use 1 (local1)

[18] = local use 2 (local2)

[19] = local use 3 (local3)

[20] = local use 4 (local4)

[21] = local use 5 (local5)

[22] = local use 6 (local6)

[23] = local use 7 (local7)
Web: CDR Session ID
CLI: cdr-seq-num
[CDRSyslogSeqNum]
Enables or disables the inclusion of the sequence number (S=) in
CDR Syslog messages.

[0] Disable

[1] Enable (default)
Web: Activity Types to Report
via Activity Log Messages
CLI: config-system > logging
> activity-log
[ActivityListToLog]
Defines the operations (activities) in the Web interface that are
reported to a Syslog server.

[pvc] Parameters Value Change = Changes made on-the-fly to
parameters. Note that the ini file parameter,
EnableParametersMonitoring can also be used to set this option,
using values
[0] (disable) or [1] (enable).

[afl] Auxiliary Files Loading = Loading of auxiliary files.

[dr] Device Reset = Resetting of device through the Maintenance
Actions page.
Note: For this option to take effect, a device reset is required.

[fb] Flash Memory Burning = Saving configuration with burn to
flash (in Maintenance Actions page).

[swu] Device Software Update = Software updates (i.e., loading
of cmp file) through the Software Upgrade Wizard.

[ard] Access to Restricted Domains = Access to restricted Web
pages:

(1) ini parameters (AdminPage)

(2) General Security Settings

(3) Configuration File

(5) Software Upgrade Key Status

(7) Web & Telnet Access List

(8) Web User Accounts

[naa] Non-Authorized Access = Attempts to access the Web
interface with a false or empty username or password.

[spc] Sensitive Parameters Value Change = Changes made to
"sensitive" parameters:

(1) IP Address

(2) Subnet Mask

(3) Default Gateway IP Address

(4) ActivityListToLog

[ll] Login and Logout = Web login and logout attempts.
Note: For the ini file parameter, enclose values in single quotation
marks, for example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard',
'naa', 'spc'.