AudioCodes Mediant 500 E-SBC, User Manual

Page: 703 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 703 Mediant 500 E-SBC
Parameter Description
you must reset the device with a burn-to-flash for your settings to
take effect.

The tags can be defined in any order.
CLI: automatic-update > auto-
firmware
[AutoCmpFileUrl]
Defines the filename and path (URL) to the provisioning server from
where the software file (.cmp) can be downloaded, based on
timestamp for the Automatic Updated mechanism.
The valid value is an IP address in dotted-decimal notation or an
FQDN.
[AUPDDigestUsername]
Defines the username for digest (MD5 cryptographic hashing)
access authentication with the HTTP server used for the Automatic
Update feature.
The valid value is a string of up to 50 characters. By default, no
value is defined.
[AUPDDigestPassword] Defines the password for digest (MD5 cryptographic hashing)
access authentication with the HTTP server used for the Automatic
Update feature.
The valid value is a string of up to 50 characters. By default, no
value is defined.
EMS: AUPD Verify Certificates
CLI: system/tls/aupd-verify-cert
[AUPDVerifyCertificates]
Determines whether the Automatic Update mechanism verifies
server certificates when using HTTPS.

[0] = Disable (default)

[1] = Enable
CLI: configure system >
automatic-update > crc-check
regular
[AUPDCheckIfIniChanged]
Enables the device to perform cyclic redundancy checks (CRC) on
downloaded configuration files (ini) during the Automatic Update
process. The CRC checks whether the content (raw data) of the
downloaded file is different to the content of the previously
downloaded file from the previous Automatic Update process. The
device compares the CRC check value (code) result with the check
value of the previously downloaded file. If the check values are
identical, it indicates that the file has no new configuration settings,
and the device discards the file. If the check values are different, the
device installs the downloaded file and applies the new configuration
settings.

[0] = (Default) Disable - the device does not perform CRC and
installs the downloaded file regardless.

[1] = Enable CRC for the entire file, including line order (i.e.,
same text must be on the same lines). If there are differences
between the files, the device installs the downloaded file. If there
are no differences, the device discards the newly downloaded
file.

[2] = Enable CRC for individual lines only. Same as option [1],
except that the CRC ignores the order of lines (i.e., same text
can be on different lines).