background image

Product Overview

1

1

4

Configure the Router

3

Attach Power

2

You may configure the router via a web browser or Telnet.

Default Router IP Address = 

192.168.1.1

Default Username =

 root

Default Password = 

root

Detailed configuration data is included on your installation
CD and also on our web site.

Your router will not work unless the antennas are attached 
and power is supplied.  Some models also require installed, 
activated SIM cards.

Insert SIM card

Attach Antennas

Powering the router with no antenna attached can 
damage the router.

Cellular 

antenna

to “DIV”.

Cellular 

antenna
to “ANT”

.

Power

Ethernet/WAN Port

USB Port

I/O Port

802.15.4e
Antenna
Connector

Aux Ports

Reset Switch

LEDs

RT Routers

802.15.4e 

antenna to  

“AUX”.

Power LED

Power

Ethernet/WAN Port

USB Port

I/O Port

802.15.4e
Antenna 
Connector

Aux Ports

Reset Switch

LEDs

3G/LTE Routers

RT Routers

Cellular
Antenna
Connector

Cellular
Antenna
Connector

SIM card 1

SIM card 2

3G/LTE Routers

802.15.4e 

antenna to  

“AUX”.

Some service providers require installed, 
activated SIM cards in order to establish 
communications.  For the corresponding 
router models, open the SIM card holder 
by pressing the small button to the right 
of the SIM card holder.

The router has built-in protection 
against reverse polarity. Apply 
+10 to +30 V DC, or connect the 
included AC power adapter.

Connect Ethernet

You will use an Ethernet connection to 
configure the router and to 
communicate with it.

5

6

Set Up Mobile Connection 

(Cellular Routers Only)

3G

 

– Click “Mobile WAN” under “Configuration”. 

Select your carrier under the primary SIM card drop 
down menu. Enter APN and credentials given from your 
provider. Apply changes.  

Note: Sprint requires extra steps. Please see 
Configuration Manual section “Sprint CDMA network 
connection” for instructions.

Common APN Examples 

Verizon: No APN required

AT&T: isp.cingular or wap.cingular

Sprint: No APN required

T-Mobile: epc.tmobile.com

Rogers: internet.com 
TELUS: sp.telus.com
   

LTE

 – Click “Mobile WAN’ under ‘Configuration”.  

Enter APN and Credentials given from your provider. 
Apply Changes. 

Common APN Examples

Verizon: vzwinternet
AT&T: broadband

Reviews: