Note: If your SIM card or device is setup to have a
Public Static IP address or you are going through a
MVNO (Mobile Virtual Network Operator) a different
APN and credentials may be needed. This information
will need to be obtained from your provider.
Fast, Easy Answers
Fast and easy on the web:
www.bb-elec.com
Spectre Network Gateways
Spectre LTE/3G/RT
Doc. Number – 710-10264-00_R0_Spectre Network Gateway_4214qsg
© 2014 B&B Electronics Manufacturing Company
1-800-346-3119 |
Europe:
+353 91 792444
www.bb-elec.com
Recommended Accessories
You can use your
smart phone to access
complete documentation
on our website. Simply
scan code to the right.
Ethernet Cables
SPECTRE LTE/3G/RT router
Power Supply
Crossover UTP cable
External Antennas
DIN rail adapter
Installation CD
First Things First...
Before you begin, be sure you have
the following:
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.bb-elec.com | E-mail: [email protected]
•
Q
uick
S
tart
G
uide
Cellular Antennas
http://www.bb-elec.
com/Global/Site-
Search.aspx?searcht
ext=antenna&search
mode=anyword
http://www.bb-elec.
com/Products/Pow-
er-Supplies-Accesso-
ries/Ethernet-Cables.
aspx
6
Set Up Mobile Connection (Cont.)
(Cellular Routers Only)
Click “Mobile WAN” under “Status”. At the bottom you
should see “Mobile Network Connection Log”. If the Router
is connected it will have a message underneath saying
“Connection successfully established.” To see the most current
status you will need to refresh the page. If a Connection does
not establish switch to the system log to see where the error
occurs.
Check Mobile Network Connection
(Cellular Routers Only)
Make sure the connection to the Router is the only enabled
network connection and that the Gateway and DNS Server
are set to the address of the Router (default IP address:
192.168.1.1). Note: You will not have to change Gateway
or DNS Server information if the network connection to the
Router is setup as DHCP.
To verify internet connectivity open a Web browser and go to
a known good website or ping a known good Internet IP ad-
dress or Web address. You should receive valid responses.
If you cannot access the internet or do not receive valid
responses, contact B&B Technical Support.
The Network Gateway needs to be programmed to
communicate to the Wzzard Edge nodes over the
SmartmeshIP wireless network, and to the application layer
via the MQTT broker. Refer to the IoT Gateway
Settings page, found under customization/user module,
to program both the SmartMesh IP and MQTT settings by
selecting the “IoT Gateway” hyperlink.
7
8
9
Test Internet Connectivity
Set Up Wzzard SmartMesh IP Network
Spectre 3G and LTE routers are certified
for many North American carriers. Check
with B&B Technical Support for the latest
carrier certifications.
