Aritech FP2000, Reference Manual

Page: 113 / 209

Common facilities – all input types
* See Input Description in the Serial Communication Format
Input: number
Enter number or use to view/change the existing defined
inputs, or create a new input. Each input required for the I/O logic
system must be defined by a unique input number.
Unused inputs have type None. The maximum number of inputs
(default 100) may be set in Memory Allocation (Page 33).
Type: type
Inputs can be set true or false by the following types and functions
that are specifically described in the following pages.
None no input defined (default)
General Page 114
Zone Page 116
Area Page 117
Adjacent Area Page 118
Internal Page 119
Time Page 120
Device Input Page 122
Device Page 123
Network Page 124
Action Page 125
Current Loop Device Page 126
Date Page 127
Fct: function
The functions available depend on the input type selected. Refer to
the page of the specific function for further details.
State: true/false
This view field shows the state of the input. The input state is the
physical input (on or off) conditioned by the Trigger and Mode of
the input definition.
Trig: latched/unlatched
Latched
The input state, once switched true, will remain true until the fire
panel is
reset, even though the input conditions may become false
before the reset.
Unlatched
The input state will become true or false according to the physical
input state and the mode.