manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 140

Output definition – type Network

(INPUT/OUTPUT, 2, 

)

OUTPUT DEFINITION

State

:false

Output

:1

Trig.

:latched

Type

:Network

Mode

:normal

Node

:01/01

 continuous

Input

:1 

 unlogged

               

0. .9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 0

Cond.: 0

P: 1

   SDZ

 

 Return to Input/Output Menu

Page  109

 

 Select Type: NETWORK and press 

Use number or 0...9 

 

 to select Panel address that the output is sent to

Use number or 0...9 

 

 

to select the Input on that panel that the output must

activate

The output will switch the input of another node (panel) connected on the network.

Node:

The node ID of whereto the output is sent

Input:

The input number setup in the input definition of the selected 
(receiving) node.

Trigger:

Latched/unlatched

Mode:

Normal/inverted
Continuous only
Unlogged/logged

Text:

Allowed

Please refer to the Network Configuration Guide (LKFP2303) for the exact way of
operation.

* See Output Description in the Serial Communication Format

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands