manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 126

Input definition – type Network

(INPUT/OUTPUT, 1, 

)

INPUT DEFINITION

State

:false

Input

:1

Trig.

:latched

Type

:Network

Mode

:active

Node

:01/04

 continuous

Output

:1

Event

 unlogged

0. .9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 0

Cond.: 0

P: 1

   SDZ

 Return to Input/Output Menu

Page 109

 

 

Place cursor at TYPE

 

 

Select Type: NET and press 

 (Unlock memory!)

 

 

Select the function

*See Common Facilities - All Input Types, Page 111 for description of Input, State,
Trigger, Mode, Event, and Test

This input definition is used for inter-panel input on the network. The input will be
switched by the output of another node (panel) connected on the network.

Node:

The node ID from which input is received

Output:

The output number setup in the output definition of the selected node.

Trigger:

Latched/Unlatched

Mode:

Passive/Active
Always continuous

Event:

Unlogged/Logged/Fire/Fault/Condition

Text:

Allowed

* See Input Description in the Serial Communication Format

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands